TM  5-2815-241-34&P INTAKE   MANIFOLD   REMOVAL INITIAL  SETUP Tools Extension,   6-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive Wrench,   open-end,   1-inch Personnel  Required Two Equipment   Condition Aneroid  control  valve  removed  (page  2-25). ACTION LOCATION ITEM REMARKS 1. Intake manifold (1) 2. Air  compressor  hose Using  1-inch  open-end  wrench,  loosen nuts  (2) and  disconnect. Seven  screws  (3), Using  1/2-inch  drive  9/16-inch  socket, seven  lockwashers 6-inch  extension,  and  ratchet  handle, (4) and seven flat unscrew and take out. washers  (5) Discard    lockwashers. WARNING Due to excessive weight, assistance will be needed to prevent personal injury when lifting heavy parts. 3. Cylinder head (6) Intake   manifold   (1) With  assistance,  take  off. and  three  gaskets  (7) Discard   gaskets. 2-26 TA   242349