TM   5-2815-241-34&P ROCKER  ARM  COVER  REMOVAL INITIAL  SETUP Tools Handle,   ratchet,   1/2-inch   drive Screwdriver,    flat-tip,    1/4-inch Socket,   9/16-inch,   1/2-inch   drive ACTION LOCATION ITEM REMARKS CAUTION Do  not  damage  injector  adjustment  procedure  decal  on  rocker  arm  cover. 1. Front rocker arm cover  (1) Crankcase   breather hose  (2)  and clamp  (3) Using  1/4-inch  flat-tip  screwdriver,  loosen clamp and take off hose. 2. NOTE Step  2  is  typical  for  all  three  rocker  arm  covers. Five  screws  (4), five  lockwashers (5),  five  flat washers  (6),  rocker arm  cover(l),  and gasket  (7) a. Using   1/2-inch   drive   9/16-inch   socket and  ratchet  handle,  unscrew  and  take off. b. Take  off  rocker  arm  cover. Discard   gasket   and   lockwashers. TASK ENDS HERE TA  242350 2-27