TM   5-2815-241-34&P ENGINE  COMPRESSION  BRAKE  HOUSING  REMOVAL INITIAL  SETUP Tools Equipment   Condition Extension,   6-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Screwdriver,   flat-tip,   3/8-inch Socket,   3/4-inch,   1/2-inch   drive Rocker  arm  cover  removed  (page  2-27). ACTION LOCATION ITEM REMARKS 1.  Three  engine  com- pression  brake housings   (1) Six  lock  tabs  (2), eighteen  nuts  (3) and twelve lock- washers  (4) a. Using 3/8-inch flat-tip screwdriver, pry ends of lock tabs away from nuts. b. Using   VP-inch   drive   3/4-inch   socket, 6-inch  extension  and  ratchet  handle, unscrew and take off. Discard  lock  tabs  and  lockwashers. 2. Front  lifting  eye (5),  rear  lifting  eye (6), two spacers (7) three  engine  com- pression  brake housings  (I),  and three  gaskets  (8) Take  off. Discard  gaskets. 2-28 TA  242351