TM  9-2815-202-34 4-21.  CAMSHAFT This  task  covers: FRONT   GEAR   COVER   REPLACEMENT a.  Removal b. Inspection c. Installation INITIAL    SETUP MODELS 7083-7395 7083-7398 1 1 TOOLS  AND  SPECIAL  TOOLS 1 1 General   mechanics  tool  kit  (App  B,  Item  96) Torque wrench (App B, Item 101) MANDATORY   REPLACEMENT   PARTS Gasket (App F, Item 46) Gasket (App F, Item 48) Lockwasher (App F, Item 95) Lockwashers (App F, Item 93) Jam nut (App F, Item 86) EQUIPMENT   CONDITION Para  Description 4-5 Fuel  strainer  bracket  removed 4-7 Front lifter bracket removed 4-9 Water  pump  removed a.   Removal (1) Remove two self tapping bolts (1) securing access cover (2) and gasket (3) to assembly cover (4). Discard gasket. NOTE Bolts securing assembly cover vary in length and diameter. For ease of assembly note location  of  bolts,  washers,  and  nuts  when  removing. (2) Remove five bolts (5), four nuts (6), five Iockwashers (7), and five flat washers (8). Remove bolt (5), jam nut (9), and Iockwasher (7). Discard Iockwashers and jam nut. (3)  Remove  bolt  (10),  Iockwasher  (11),  and  flat  washer  (12).  Discard  Iockwasher. (4)  Remove  two  bolts  (13),  two  Iockwashers  (7),  and  two  flat  washers  (8).  Discard  Iockwashers. (5) Remove bolt (14) and flat washer (15). (6)  Remove  assembly  cover  (4)  and  gasket  (16)  from  block.  Discard  gasket. b.   Inspection Inspect assembly cover and access cover for cracks, pitting, or damage. 4-68