TM9-2815-202-34
4-29. CAMSHAFT AND GEAR ASSEMBLIES REPLACEMENT (Cent)
(11)
(12)
(13)
n (14)
(15)
Install water pump drive gear (7) to right bank camshaft.
Slip Iockwasher (9) over front end of each camshaft. Install nut (8) to front end of each
l
camshaft and finger tighten.
Wedge a rag between rear camshaft gears to prevent rotation. Torque nut (8) on each end of
both camshafts to 300-325 Ib-ft (407-441 N-m),
e
For models 7083-7391, 7083-7396, and 7083-7399, install camshaft adaptor (6) to water pump
drive gear (7). Secure in place with three bolts (4), and three Iockwashers (5). Torque bolts to
15-19 Ib-ft (20-26 N-m).
,
Install camshaft gear nut retainer (3) to each camshaft gear. Secure retainer plate in position
with four bolts (1) and four Iockwashers (2). Torque bolts to 35-39 Ib-ft (47-53 N-m).
.
4-114
Change 1
|
|
