TM9-2815-202-34
3
(2) Rear End Plate
(a) Remove eight bolts (1 O) and eightIockwashers(11 ) from end plate (1 2). Discard
Iockwashers.
(b) Remove end plate (12) and gasket (13) from cylinder block (8). Discard gasket.
(c) If required, remove nine screw inserts (14) by pressing from end plate. When removing
inserts, support end plate on flat surface to prevent warping or bending.
10
CA’=--
7
11
4 - 1 17
|
|
