l b. l TM   9-2815   -202-34 Disassembly (1) (2) (3) (4) (5) (6) (7) (8) (9) Remove four bolts (1 O), four flat washers (11), and two strainer element screens (12) from tube  assembly  (13)  and  adaptor  (14). Remove two bolts (15), two  Iockwashers   (16),  tube  assembly  (13),  baffle  (17),  and  two gaskets  (18)  from  oil  pump  assembly  (6).  Discard  Iockwashers   and  gaskets. Remove two bolt and  Iockwasher   assemblies  (19)  securing  two  bracket  assemblies  (2)  to tube  assembly  (13). If  necessary  to  separate  bracket  (2)  assemblies,  remove  two  bolts  (20),  two  self-locking  nuts (21 ), and eight flat washers (22) from four brackets. Discard self-locking nuts. Remove  two  bolts  (23),  two  Iockwashers  (24), adapter (14), and gasket (25) from oil pump assembly (6). Discard Iockwashers and gasket. Secure  oil  pump  assembly  (6)  in  a  soft-jawed  vise. Remove bolt (26) and spring washer (27) securing spur gear (28) to drive shaft on oil pump assembly  (6).  Discard  spring  washer. Using puller (29), remove spur gear (28) from drive shaft. Remove puller from spur gear. Remove oil pump assembly (6) from soft-jawed vise. 2 8    ” 29 28 4 - 1 25