TM 9-2815-202-34
4-36. CYLINDER BLOCK MAINTENANCE (Cont.)
(10)
(11)
(12)
(12.1)
(13)
(14)
(15)
(16)
(17)
For models 7083-7395 and 7083-7398 only, remove dipstick adapter (24) from left side of
block.
Remove two each of pipe plugs (25 and 26) from left side of block.
For models 7083-7395,7083-7398 and 7083-7399, remove turbocharger oil feed elbow (27).
For models 7083-7391 and 7083-7396, remove pipe plug (27.1).
Remove drain cock (28), and four cup plugs (29) from left side of block. Discard cup plugs.
For models 7083-7395 and 7083-7398, remove pipe plug (30) from rear left side of block. For
models 7083-7391, 7083-7396 and 7083-7399, remove two pipe plugs (30) from left side.
Remove two bolts (31 ), two nuts (32), and four Iockwashers (33) securing oil cooler flange (34)
to cylinder block. Remove flange (34) and gasket (35). Discard gasket and Iockwashers.
Remove two studs (36) from right side of block.
Remove two pipe plugs (37), three cup plugs (38), and one each of pipe plugs (39, 40,41, and
42) from right side of block. Discard cup plugs.
Remove drain cock (43) and solid plug (44) from right side of block.
4-164 C h a n g e 1
|
|
