TM  9-2815-202-34 SECTION   IV.   COMPONENT   REPAIR 4-37.   TURBOCHARGER   REPAIR This  task  covers: a.   Disassembly b.   Cleaning c.   Inspection d.   Assembly INITIAL   SETUP MODELS 7083-7395 7083-7396 TOOLS  AND  SPECIAL  TOOLS General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) Dial indicator adaptor (App B, Item 4) Turbocharger holding fixture (App B, Item 21) Magnetic base dial indicator (App B, Item 45) Torque wrench (App B, Item 100) MANDATORY REPLACEMENT PARTS Locking plates (App F, Item 112) Seal ring (App F, Item 140) Piston ring (App F, Item 129) Lock tabs (App F, Item 87) Piston  rings  (App  F,  Item  130) Thrust washer (App F, Item 162) Bearing kits (App F, Item 2) Snap rings (App F, Item 144) LockWashers  (App  F,  Item  93) Gasket (App F, Item 74) Nut,  special  (App  F,  Item  171) EXPENDABLE/DURABLE    SUPPLIES Engine oil (App C, Item 16) Cleaning solvent (App C, Item 10) Crocus cloth (App C, Item 12) Silicone carbide cloth (App C, Item 41 ) Antiseize compound (App C, Item 1) EQUIPMENT CONDITION Para    Description 4-2 Turbocharger  removed  (7083-7395) 5-2 Turbocharger  removed  (7083-7396) a.   Disassembly (1)  Mark  relative  position  of  compressor housing (1), center housing (2), and turbine housing (3) with a scribe to assure  reassembly  in  same  relative location. Exercise  care  when  removing compressor  housing  and  turbine housing to prevent damage to compressor  and  turbine  wheels. C  h  a  n  g  e       1 4-175