TM 9-2815-202-34
NOTE
Use correct size sleeve to press seal into pump body. Sleeve should only contact metal
part of seal.
(7) Install new oil seal (14) into pump body (4).
NOTE
Oil seal must be flush with the water pump seal counter bore in pump body.
(8) Invert pump body (4) on arbor press.
(9) Apply sealant to outer diameter of new water pump seal (15).
NOTE
Use correct size sleeve to press seal into pump body. Sleeve should only contact metal
part of seal.
(10) Press water pump seal (15) into pump body (4). Remove from arbor press.
When securing gear in soft-jawed vise, hold gear securely. Use care to prevent
damaging gear teeth.
(11) Hold gear (5) securely. Apply compound to threads on shaft (8). Place pump impeller (10),
flat washer (7), and lock nut (6) on shaft (8).
4-265
|
|
