TM   9-2815-202-34 Section   II.   GENERAL   ENGINE   MAINTENANCE 5-2.   TURBOCHARGER   REMOVAL/lNSTALLATION This  task  covers: a.  Removal b.  Cleaning/Inspection c.  Installation INITIAL   SETUP MODELS MANDATORY  REPLACEMENT  PARTS 7083-7391 7083-7396 4 Locking nuts (App F, Item 105) 1 Gasket (App F, Item 79) TOOLS AND SPECIAL TOOLS EQUIPMENT  CONDITION General mechanics tool kit (App B, Item 96) Torque wrench (App B, Item 101) Para   Description 3-8 Starter  removed 3-10 Turbocharger oil return line removed 3-12 Turbocharger oil supply line removed 3-14 Air inlet manifold removed a.   Removal (1) (2) Loosen four clamps (1) and two hoses (2) connecting air inlet tube (3) to turbocharger (4) and air inlet housing (5). Slide  two  hoses  (2)  and  four  clamps (1) onto air inlet tube (3) and remove tube.  Remove  hoses  and  clamps  from tube. CAUTION Tape all openings of turbocharger after removal to keep foreign particles  from  entering  and damaging turbocharger blades. (3) (4) Remove four locking nuts (6) and four washers (7) securing turbocharger (4) to  exhaust  manifold  (8).  Discard locking  nuts. Remove  turbocharger  (4)  and  gasket (9). Discard gasket. C  h  a  n  g  e      1 5-3