TM  9-2815-202-34 5-37. (9) (10) (11) (11.1) (12) (12.1) (13) (13.1) (14) (15) CYLINDER HEAD REPAIR (Cont) Install fuse plug (49) in outboard side of cylinder head. Plug must be flush to 0.16 inch below surface. Apply pipe sealant with teflon to cup plug (48) and install in rear of cylinder head. For models 7083-7396 and 7083-7399, install five exhaust manifold studs (46) in right cylinder head or eight exhaust manifold studs (46) in left cylinder head. Torque studs to 25-40 Ib-ft (34-54  N-m). For model 7083-7391, install five exhaust manifold studs (46) in right head or five exhaust manifold studs (46) and four studs (46.1) in left cylinder head. Torque studs to 25-40 Ib-ft (34-54  N-m). For models 7083-7396 and 7083-7399, install three pipe plugs (47) in outboard side of left cylinder  head. For model 7083-7391, install four pipe plugs (47) in outboard side of right cylinder head. For models 7083-7396 and 7083-7399, install eight water manifold studs (45) in cylinder head. Torque studs to 10-25 Ib-ft (14-34 N-m). For model 7083-7391, install six water manifold studs (45) in cylinder head. Torque studs to 10-25  Ib-ft  (14-34  N-m). Install eight washers (44) and eight fuel connectors (4) to cylinder head. Torque connectors to 40-45 Ib-ft (54-61 N-m). Install gasket (43), adaptor (42), two flat washers (41 ), and two bolts (40) to front inboard corner of cylinder head. Torque bolts to 7-9 Ib-ft (10-12 N-m). 5   -   5   8 C  h  a  n  g  e      1