TM  9-2815-202-34 Section  III.  REMOVAL  AND  INSTALLATION  OF  ENGINE  FROM  CONTAINER 3-3.   ENGINE   FROM/TO   CONTAINER   -   12268285 This  task  covers: a.  Removal b. Preservation c.  Installation INITIAL   SETUP MODELS 7083-7391 7083-7395 7083-7396 MANDATORY   REPLACEMENT   PARTS 37  Lockwashers  (App  F,  Item  95) 4 Lockwashers (App F, Item 94) TOOLS  AND  SPECIAL  TOOLS EXPENDABLE/DURABLE   SUPPLIES General mechanics tool kit (App B, Item 96) Three-legged  sling  (App  B,  Item  84) Four-legged sling (App B, Item 82) Torque wrench (App B, Item 101) Desiccant bags (App C, Item 14) Seal (App C, [tern 35) Sealant (App C, Item 39) Preservation oil (App C, Item 31) Tape (App C, Item 27) Engine oil (App C, Item 16) Grease (App C, Item 22) a.   Removal WARNING Wear  safety  glasses  and  stand clear  of  air  release  ports  when purging  air  from  reusable metal  container.  Make  certain air  pressure  is  fully  vented before  disassembly.  Injury  to eyes  and  inner  ears  can  result from  failure  to  properly  vent containers   before disassembly. (1) Release pressure in container by pressing air release button located at center of breather valve (1). (2) Remove twenty-eight bolts (2), twenty- eight  Iockwashers  (3),  and  twenty- eight  nuts  (4),  from  container.  Discard Iockwashers. 3-8  C  h  a  n  g  e      1