TM    9-2815-202-34 WARNING Never  crawl  under  equipment when  performing  maintenance unless equipment is  securely blocked.  Keep  clear  of equipment when it is being raised  or  lowered.  Do  not allow heavy components to swing  while  suspended  by lifting  device.  Exercise extreme  caution  when  working near  a  cable  or  chain  under tension. Equipment may drop or shift and injury to personnel may result. (3) (4) (5) (6) • • Using a four hook chain (5), remove top section of container (6). Inspect container seal (7), for cuts, tears, or other damage. Discard seal if unserviceable. Remove two bolts (8), two bevel washers (9), two Iockwashers (10), and two nuts (11 ) securing front U- shaped bracket (12) to container rail (13). Discard Iockwashers. Remove three bolts (14), three bevel washers (15), three Iockwashers (16), and three nuts (17) securing rear mounting bracket (18), to container rail (19). Discard Iockwashers. NOTE In  cases  where  engine  has  been returned for repair, forward all engine parts previously removed and stored in container to proper reconditioning aread. For models 7083-7391 and 7083-7396, engine crankshaft damper is secured inside shipping container. If engine is to be made operational, install damper (Refer to  Para  5-27). Change 3-9