| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL SUPPLY PUMP REPLACEMENT (2CA AND 2DA)
THIS WORK PACKAGE COVERS:
Removal, Installation, and Purge
INITIAL SETUP:
Tools:
Personnel Required:
General mechanic's tool kit (item 121, WP 0176)
Track Vehicle Repairer (1) 63H10
Container to collect fuel (1.0 gal. (3.8 L)
Equipment Conditions:
minimum capacity)
Power pack removed from vehicle and placed
Mandatory Replacement Parts:
on a flat stationary surface
Gasket (item 315, WP 0175)
Lock washer (2) (item 89, WP 0175)
Self-locking nut (4) (item 31, WP 0175)
REMOVAL
1. Disconnect hose (1) from fuel pump (2)
outlet fitting.
2. Collect fuel in a suitable container and
discard.
7
NOTE
4,5,6
The inlet tube is a rigid steel tube;
removing it requires both ends to
be free.
3
Remove inlet tube (3).
a. Disconnect both ends of inlet tube (3).
b. Remove two machine screws (4) flat
1
washers (5) and lock washers (6).
Discard lock washers.
c. Displace back-flow valve (7) as
3
necessary to remove inlet tube (3).
4. Remove fuel pump (2).
2
a. Remove four self-locking nuts (8) and
flat washers (9). Discard self-locking
8,9
nuts.
10
b. Remove fuel pump (2) from adapter (10).
c. Remove and discard mounting gasket
(not illustrated).
WP 0047 00-1
|
||
|
||
