| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
OIL FILTERS REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Installation
INITIAL SETUP:
Tools:
Expendable Materials:
General mechanic's tool kit (item 121, WP 0176)
Cleaning cloth (item 10, WP 0173)
Jackscrews (2) (item 71, WP 0176)
Lubricating oil (item 21, WP 0173)
Torque wrench, 0-300 inch-pounds (item 124,
Personnel Required:
Track Vehicle Repairer (2) 63H10
Suitable container (1-gallon (4-liter) minimum)
Equipment Condition:
Mandatory Replacement Parts:
Engine removed from vehicle and placed on a
Gasket (item 240, WP 0175)
flat stationary surface
Oil filter element (2) (item 218, WP 0175)
Seal washer (item 158, WP 0175)
Self-locking nut (10) (item 113, WP 0175)
1,2,3
REMOVAL
1. Drain oil filter housing and oil coolers.
a. Remove oil vent cap screw (1) with flat
washer (2) and seal washer (3). Discard
seal washer.
b. Loosen oil drain valve (4) six complete
turns to allow drainage into oil pan. Do
not loosen oil drain valve adapter (5).
5
4
6
2. Remove cover (6).
9
a. Remove ten self-locking nuts (7) with flat
8
washers (8) to remove cover (6). Discard
7
nuts (7).
b. Insert two 3/8-24 jackscrews (9)
(item 71, WP 0176) in threaded puller
holes and tighten alternately to remove
cover (6).
c. Remove jackscrews (9).
9
WP 0073 00-1
|
||
|
||
