| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
PRIMARY FUEL FILTER REPAIR/ELEMENT REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Cleaning/Inspecting, Assembly, Installation
INITIAL SETUP:
Tools:
Expendable and Durable Items:
Container for fuel, minimum 1 gallon (3.8 liter)
Cleaning compound, solvent (item 8, WP 0173)
capacity
Thread sealing tape (item 41, WP 0173)
General mechanic's tool kit (item 121, WP 0176)
Personnel Required:
Torque wrench, 0-300 inch-pounds (item 124,
Track Vehicle Repairer (1) 63H10
WP 1076)
Equipment Conditions:
Mandatory Replacement Parts:
Engine removed from vehicle and placed on a
Filter element (item 217, WP 0175)
flat stationary surface
Gasket (item 198, WP 0175)
Gasket (item 199, WP 0175)
O-ring (item 4, WP 0175)
Self-locking nut (2) (item 38, WP 0175
Self-locking nut (item 112, WP 0175)
REMOVAL
WARNING
FIRE HAZARD - Diesel fuel is combustible. Do not smoke or allow
open flames or sparks in areas where diesel fuel and combustible
materials are used or stored. DEATH or severe injury may result if
personnel fail to observe this precaution. If you are burned, seek
medical aid immediately.
CAUTION
Filter must be removed from engine to thoroughly clean or replace
parts not otherwise accessible. Never clean inside of filter when
connected to fuel lines. Unseen particles could enter fuel lines and
damage pumps and injectors.
NOTE
The different engine models orient the inlet and outlet hoses
differently. Take note of the orientation of these hoses for installation.
WP 0086 00-1
|
||
|
||
