ASSEMBLY - TM-9-2815-220-240897

Custom Search

Back
INSPECTION (Continued)

Up
TM-9-2815-220-24 Maintenance Manual for AVDS-1790 2CA 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

Next
ASSEMBLY (Continued)

TM 9-2815-220-24

PTO COUPLING/FUEL PUMP DRIVE HOUSING REPAIR (2DR ONLY)

0111 00

ASSEMBLY

1. Install new seal (25) (item 224, WP 0173).

a. Apply a bead of silicone sealant (item 33, WP 0173) on wall of casting where seal will be

installed.

b. Install seal in PTO/fuel pump housing (8) with lip of seal facing inwards (towards engine).

2. Assemble spur gear (21) and drive bevel gear assembly (20) into adapter (16).

a. Lubricate spur gear (20) with Lubriplate (item 23, WP 0173) and slide into adapter (16).

b. Install bevel gear shaft (20) through spur gear (21).

c. Secure with slotted nut (23) using flat washer (24).

d. Using dial indicator (item 53, WP 0170), check endplay between spur gear (21) and

adapter (16).

(1) Endplay must not exceed 0.007 inch.

e. Install new cotter pin (22) (item 48, WP 0175).

WP 0111 00-7