FAN DRIVE HOUSING BASE (DAMPER END) REPAIR

Custom Search

Back
INSTALLATION (Continued)

Up
TM-9-2815-220-24 Maintenance Manual for AVDS-1790 2CA 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

Next
REMOVE (Continued)

TM 9-2815-220-24

FAN DRIVE HOUSING BASE (DAMPER END) REPAIR

0170 00

THIS WORK PACKAGE COVERS:

Removal, Cleaning, Inspection, Repair, and Installation

INITIAL SETUP:

Tools:

Expendable and Durable Items:

General mechanic's tool kit (item 121, WP 0176)

Lubriplate (item 23, WP 0173)

Torque wrench, 0-175 foot-pounds (item 127,

Sealant, RTV-1473 (item 33, WP 0173)

Personnel Required:

Mandatory Replacement Parts:

Track Vehicle Repairer (1) 63H10

Cotter pin (10) (item 48, WP 0175)

Equipment Conditions:

O-ring (item 63, WP 0175)

Engine on maintenance stand (WP 0130)

Fan drive housing removed (WP 0169)

REMOVAL

1. Remove fan drive housing base (1).

a. Remove and discard ten cotter pins (2).

b. Remove ten slotted plain nuts (3) with flat washers (4) securing base (1) to crankcase.

c. Remove two screws (5) with flat washers (6) securing base (1) to crankcase.

d. Remove base (1) from crankcase.

NOTE

CAUTION

WP 0170 00-1