| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FRONT FAN DRIVE AND HOUSING, REPLACE/REPAIR
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Repair, and Assembly
INITIAL SETUP:
Tools:
Mandatory Replacement Parts (Continued)
Arbor press (item 8, WP 0176)
Retaining ring (item 17, WP 0175)
General mechanic's tool kit (item 121, WP 0176)
Retaining ring (2) (item 287, WP 0175)
Inside micrometer caliper set (item 16, WP 0176)
Self-locking nut (4) (item 24, WP 0175)
Outside caliper set (item 17, WP 0176)
Self-locking nut (9) (item 140, WP 0175)
Retaining ring pliers (item 81, WP 0176)
Expendable and Durable Items:
Telescoping gauge set (item 54, WP 0176)
Lubriplate (item 29, WP 0173)
Torque wrench, 200-1000 inch-pounds
Pipe sealant (item 42, WP 0173)
(item 125, WP 0176)
Sealing compound (item 33, WP 0173)
Fabricated Items:
Wire, nonelectrical (item 44, WP 0173)
Lifting tool (item 2, WP 0177)
Personnel Required:
Mandatory Replacement Parts:
Track Vehicle Repairer (2) 63H10
Ball bearing (item 294, WP 0175)
Equipment Conditions:
Ball bearing (item 297, WP 0175)
Engine on maintenance stand (WP 0130)
Ball bearing (item 306, WP 0175)
Breather tubes and oil supply hoses removed
Cotter pin (4) (item 48, WP 0175)
Hose (item 181, WP 0175)
Fuel return lines (WP 0080) and fire
extinguisher tube removed (0097)
Key washer (item 320, WP 0175)
Fuel injection pump assembly removed
O-ring (item 62, WP 0175)
O-ring (2) (item 154, WP 0175)
Pipe plug (item 277, WP 0175)
REMOVAL
1. Disconnect front fan drive shaft tube assembly (1).
a. Loosen two hose clamps (2).
b. Remove four self-locking nuts (3) with flat washers (4) securing retaining plates (5).
Discard self-locking nuts.
4 3
3 4
2
5
5
1
WP 0169 00-1
|
||
|
||
