| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL INJECTION TUBES REPLACEMENT
0113 00
INSTALLATION (Continued)
2. Install four fairlead halves (19) between tube assemblies and four double-angle brackets (20,
21, 22, and 23) with cut-off corners adjacent to manifolds (see detail A).
CAUTION
When bending injection tubes is required, be careful not to nick
tubing. The bending tools are designed to allow bending without
nicks.
3. Assure that fairlead halves (19) are aligned with bracket (20, 21, 22, and 23) holes and align
tubes to fit within 1/8 inch (3.175 mm) in any direction with fairlead halves. Use two bending
tools (24) (item 13, WP 0177).
4. Install four fairlead halves (19) on top of fuel injection tubes (see detail A).
a. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of 16 screws (25).
b. Install retainers (26), using screws (25) and new self-locking nuts (27) (item 38, WP 0175),
onto four double-angle brackets (20, 21, 22, and 23).
c. Tighten 16 screws (25) to 160-180 inch-pounds (18-20 Nm).
24
24
A
A
25
26
20
21
19
23
22
27
A
A
WP 0113 00-6
|
||
|
||
