| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL INJECTION TUBES REPLACEMENT
0113 00
INSTALLATION (Continued)
5. Install lower fairlead half (28) between tube assembly and double-angle bracket (29) (see
detail B).
CAUTION
When bending injection tubes is required, be careful not to nick
tubing. The bending tools are designed to allow bending without
nicks.
6. Assure that fairlead half (28) is aligned with bracket (29) holes and align tube to fit within
1/8 inch (3.175 mm) in any direction with fairlead half. Use two bending tools (24) (item 13,
7. Install upper fairlead half (28) on top of fuel injection tube (see detail B).
a. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of two screws (25).
b. Install retainer (30), using screws (25) and new self-locking nuts (27) (item 38, WP 0175),
onto double-angle bracket (29).
c. Tighten two screws (25) to 160-180 inch-pounds (18-20 Nm).
24
B
24
25
30
29
28
29
27
WP 0113 00-7
|
||
|
||
