| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR (2DR)
0123 00
DISASSEMBLY
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
1. Place throttle control assembly (13) in a machinist's vise (item 132, WP 0176) and remove
retaining ring (15) from straight shaft (16), using snap ring pliers (item 81, WP 0176). Discard
retaining ring.
2. Remove bearing (17) using a suitable puller then remove retaining ring (18) from straight
shaft (16). Discard retaining ring and bearing.
3. Remove screw (19) and lock washer (20) from throttle lever assembly (8). Discard lock
washer.
4. Remove throttle lever assembly (8) and woodruff key (21) from straight shaft (16). Discard
woodruff key.
5. Remove retaining ring (22) and flat washer (23) from straight shaft (16). Discard retaining
ring.
6. Remove fuel shutoff lever assembly (24) from straight shaft (16).
7. Remove and discard two plain seals (25) from fuel shutoff lever assembly (24).
8. Remove flat washer (26) and retaining ring (27) from straight shaft (16). Discard retaining
ring.
9. Remove screw (28) and lock washer (29) from throttle lock control lever assembly (30).
Discard lock washer.
10. Remove throttle lock control lever assembly (30) and woodruff key (31) from straight
shaft (16). Discard woodruff key.
13
31
21
16
25
24
30
25
27
23
26
22
8
29
28
18
17
15
20
19
WP 0123 00-3
|
||
|
||
