| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR (2DR)
0123 00
DISASSEMBLY (Continued)
11. Remove two throttle control spacers (31) and spring (9) from straight shaft (15). Discard
spring.
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
12. Remove retaining ring (33) from straight shaft (16). Discard retaining ring.
13. Remove machine screw (34), plain nut (35), and angle bracket (36) from governor cross shaft
control lever assembly (37).
14. Remove governor cross shaft control lever assembly (37), two bearings (38), and two retaining
rings (39) as an assembly, using a suitable puller (item 85, WP 0176), from straight shaft (16).
15. Remove two retaining rings (39) and two bearings (38) from governor cross shaft control lever
assembly (37). Discard retaining rings and bearings.
16. Remove two machine screws (40) and two lock washers (41) securing electrical solenoid (42)
to solenoid housing assembly (12). Discard lock washers.
17. Disengage rigid connecting link (43) from solenoid control housing (44) and remove electrical
solenoid (42) with gasket (45). Discard gasket.
18. Remove spring pin (46), rigid connecting link (43), spring retainer (47), spring (48), and
spring retainer (49) from electrical solenoid (42). Discard spring pin and spring.
41
42
40
45
12
49
48
44
46
47
16
43
38
39
37
39
38
33
32
9
32
36
35
34
WP 0123 00-4
|
||
|
||
