| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPLACE/REPAIR (2DR)
0123 00
DISASSEMBLY (Continued)
19. Remove three screws (50), with lock washers (51), and flat washers (52) securing access
cover (53) to solenoid housing assembly (12). Discard lock washers.
20. Remove access cover (53) and gasket (54). Discard gasket.
21. Loosen plain nut (55) and remove machine screw (56) from solenoid stop control (57).
22. Remove solenoid stop control (57) from pin (58) in solenoid control housing (44).
WARNING
Retaining rings are spring tension devices: take care when removing
or installing them. They can slip or break and become airborne
causing eye damage or other bodily harm.
23. Remove outer retaining ring (59) and flat washer (60) from straight shaft (16). Discard
retaining ring.
24. Slide straight shaft (16) through solenoid housing assembly (12) and solenoid control
housing (44) until bearing (61) and two retaining rings (62) are exposed.
25. Remove and discard outer retaining ring (62).
26. Remove and discard bearing (61) using a suitable puller (item 85, WP 0176).
50
51
52
53
54
62
61
62
12
44
57
16
55
60
56
59
58
WP 0123 00-5
|
||
|
||
