| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CYLINDER ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Cleaning, Inspection, and Installation
INITIAL SETUP:
Tools and Special Tools:
Mandatory Replacement Parts:
Box wrench (item 32, WP 0176)
O-ring (item 79, WP 0175)
Chain lift assembly (item 18, WP 0176)
Expendable Materials:
Crankcase protectors (item 25, WP 0176)
Lubricating oil (preservation oil) (item 21,
General mechanic's tool kit (item 121, WP 0176)
Piston ring compressor (item 21, 22, 23, WP
Personnel Required:
Track Vehicle Repairer (2) 63H10
Retaining ring pliers (item 81, WP 0176)
Equipment Conditions:
Torque wrench, 0-175 foot-pounds (item 127,
Engine on maintenance stand (WP 0130)
Camshaft assembly removed
Torque wrench adapter (item 4, WP 0176)
For left bank (WP 0149)
Torque wrench adapter (item 5, WP 0176)
For right bank (WP 0150)
Splined wrench, For Model 2CA or 2DA: (item
Exhaust manifolds removed (WP 0107)
136, WP 0176) (Flywheel turning tool)
Intake manifold assembly removed (WP 0108)
Fabricated Tools:
Cylinder deflectors and shrouds removed
For Model 2DR: Engine front turning tool
(item 3, WP 0177), or Engine flywheel turning
tool (item 4, WP 0177)
REMOVAL
NOTE
Single or multiple cylinder assemblies can be removed from each
bank. If cylinder assemblies only need to be removed from one bank,
major assemblies can be removed from just one bank.
1. Rotate maintenance stand so that
cylinders (1) are horizontal.
1
WP 0133 00-1
|
||
|
||
