| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
GENERATOR DRIVE MECHANISM REPLACE/REPAIR (650 AMPERE)
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Inspection, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools:
Mandatory Replacement Parts:
Arbor press (item 8, WP 0176)
Bearing (item 307, WP 0175)
General mechanic's tool kit (item 121, WP 0176)
Gasket (2) (item 353, WP 0175)
Generator coupling tool (item 58, WP 0176)
Lock washer (5) (item 98, WP 0175)
Generator holding fixture (item 59, WP 0176)
O-ring (item 67, WP 0175)
Inside micrometer caliper set (item 16, WP 0176)
Retaining Ring (item 14, WP 0175)
Mechanical puller adapter (item 2, WP 0176)
Self-locking nut (item 35, WP 0175)
Outside micrometer caliper set
Expendable Materials:
(item 17, WP 0176)
Lubricating oil, engine (item 21, WP 0173)
Retaining ring pliers (item 79, WP 0176)
Lubriplate (item 23, WP 0173)
Slide hammer puller assembly (item 88, WP 0176)
Wire, non-electrical, 2-pound spool
Telescoping gauge set (item 54, WP 0176)
(item 44, WP 0173)
Torque wrench, 0-175 foot-pounds
Personnel Requirements:
(item 127, WP 0176)
Track Vehicle Repairer (1) 63H10
Torque wrench, 0-600 foot-pounds
(item 128, WP 0176)
Equipment Conditions:
Engine on maintenance stand (WP 0130)
Accessory drive gear removed (WP 0141)
Crankshaft removed (WP 0139)
Generator removed (WP 0051)
WP 0156 00-1
|
||
|
||
