| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
ACCESSORY DRIVE HOUSING BASE REPLACE/REPAIR
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Cleaning, Inspection, Repair, Assembly, and Installation
INITIAL SETUP:
Tools:
Expendable and Durable Items:
General mechanic's tool kit (item 121, WP 0176)
Lubriplate (item 23, WP 0173)
Torque wrench, 0-175 foot-pounds (item 127,
Pipe thread sealant (item 29, WP 0173)
Silicon sealing compound (item 33, WP 0173)
Mandatory Replacement Parts:
Personnel Required:
Cotter pin (10) (item 48, WP 0175)
Track Vehicle Repairer (1) 63H10
O-ring (3) (item 62, WP 0175)
Equipment Conditions:
Pipe plug (4) (item 277, WP 0175) [401752]
Engine on maintenance stand (WP 0130)
Accessory drive housing assembly and
associated parts removed (WP 0158)
REMOVAL
1. Remove accessory drive base (1).
a. Remove and discard ten cotter pins (2).
b. Remove ten slotted nuts (3) with flat washers (4).
c. Remove six screws (5) with flat washers (6).
d. Remove accessory base (1) from crankcase.
3
2
5
6
4
1
WP 0160 00-1
|
||
|
||
