| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL INJECTION ADVANCE CONTROL TEST
THIS WORK PACKAGE COVERS:
Before Test, Test, and After Test
INITIAL SETUP:
Tools:
Expendable and Durable Items:
Fuel injection advance test stand
Lubricating oil, MIL-L-45199
(item 116, WP 0176)
(item 21 WP 0173)
General mechanic's tool kit (item 121, WP 0176)
Diesel fuel, VV-F-800 (DF-2)
(item 12, WP 0173)
Torque wrench, 0-300 inch-pounds
(item 124, WP 0176)
Non-electrical wire (item 44, WP 0173)
Mandatory Replacement Parts:
Personnel Required:
Cotter pin (2) (item 47, WP 0175)
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Repaired/Assembled Fuel Injection Advance
Control (WP 0161)
BEFORE TEST
NOTE
Testing of the fuel injection pump advance unit is required on all units that have
been repaired to ensure optimum engine performance. In addition, testing of the
advance unit should be accomplished whenever the engine is overhauled. Testing
will be accomplished prior to assembly of the engine rear fan and accessory drive
housing assembly. Test stand (1) is designed to check and bench-test the advance
characteristics of the fuel injection pump advance unit under conditions simulating
engine operation over an operating range of 200 to 2600 rpm.
1
WP 0162 00-1
|
||
|
||
