TM 9-2815-225-34&P
3-49. ACCESSORY DRIVE REPAIR (Contd)
LOCATION/ITEM
ACTION
REMARKS
15. Wear sleeve (16)
Inspect for wear in grooves.
Discard if worn. To remove wear
sleeve (16), use a round-nose
punch through one of the threaded
puller holes and drive wear sleeve
(16) off. Installation requires the
use of a mandrel and arbor press.
Press to 0.015 in. (0.381 mm)
below face of accessory drive pul-
ley (2) with chamfered end away
from pulley (2).
3-299
|
|
