TM 9--2815--247--34 0033 00--1 AFTERCOOLERS, BRACKETS, SCREENS AND ASSOCIATED PARTS REPAIR 0033 00 THIS WORK PACKAGE COVERS: Disassembly, Assembly INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Portable electric drill (item 82, WP 0103 00) Drill (item 13, WP 0103 00) Riveter (item 78, WP 0103 00) Materials/Parts Lockwashers (4) (item 147, WP 0102 00) Seal (item 128, WP 0102 00) Blind rivets (10) (item 126, WP 0102 00) Flat washers (10) (item 139, WP 0102 00) Adhesive (item 8, WP 0100 00) Lubricant (item 12, WP 0100 00) Equipment Conditions Intake manifold and aftercooler assembly removed (WP 0031 00) Aftercooler by--pass assembly removed (WP 0034 00) NOTE Procedures are the same for both the left or right bank aftercoolers. The right bank aftercooler is shown. Disassembly 1.   Remove four screws (1) and aftercooler supports (2, 3, and 4) from aftercooler assembly (5). 2.   Remove two screws (6), two lockwashers (7), two flat washers (8) and two aftercooler screens (9). Discard lock- washers. Figure 28 2 1 1 1 3 4 5 8 6 7 9