TM 9--2815--247--34 0037 00--11 FUEL INJECTOR TUBES, BRACKETS, AND ASSOCIATED PARTS -- CONTINUED 0037 00 Installation -- Continued 12. Install lower fairlead half (12) between tube assembly and double--angle bracket (13). CAUTION Where bending tubes is required, be careful not to nick tubing. The bending tools are designed to allow bending without nicks. 13. Using two bending tools (72), align tube to fit within 1/8 inch (3.175 mm) in any direction with fairlead half, which should be aligned with bracket bolt holes. 14. Apply a small amount of lubricant (item 12, WP 0100 00) to threads of two bolts (9). 15. Install remaining fairlead half (12), retaining strap (11), two bolts (9), and two new self--locking nuts (10) (DETAIL B) onto double--angle bracket (13). 16. Tighten two bolts (9) to 160--180 lb--in (18--20 NSm). Figure 36 RIGHT BANK FLYWHEEL END DAMPER END B B 9 10 11 12 12 13 72 72 LEFT BANK