TM 9--2815--247--34
0076 00--16
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPAIR --
CONTINUED
0076 00
Installation -- Continued
24. Install lubrication fitting (8) using mechanical puller (7).
25. Install a new retaining ring (5) into bevel gear shaft (6).
26. Apply a small amount of lubricant to thread of six screws (1).
27. Install access cover (3) with a new gasket (4), six screws (1) and six flat washers (2).
28. Torque six screws (1) to 150--175 lb--in (17--20 NSm).
Figure 11
1
2
3
4
5
6
7
8
|
|
