TM 9--2815--247--34
OIL PUMP ASSEMBLY REPAIR -- CONTINUED
0082 00
Assembly -- Continued
25. Install access cover (9) and secure with three screws (12), three flat washers (11), three new self--locking nuts
(10), and two new self--locking nuts (8). Torque self--locking nuts to 125--150 lb--in
(14--17 NSm).
26. Install screw (6) and flat washer (7) into housing assembly (29).
NOTE
Temporarily install oil pump assembly on engine, if avail-
able, to torque cap.
27. Install valve (3), inner spring (5), outer spring (4), and cap (2) into housing assembly (29). Torque cap (2) to
150--170 lb--in (17--19.2 NSm).
28. Secure cap (2) with new lockwire (1).
Figure 19
1
2
3
4
5
9
8
12
11
10
7
6
29
NOTE
FOLLOW--ON MAINTENANCE:
Install oil pump (WP 0081 00)
END OF TASK
0082 00--17/18 blank
|
|
