ARMY TM 92815-252-24
AIR FORCE TO 38G1-92-2
3-15.3. Installation
a.
Remove all caps installed during removal.
b.
Connect fuel line (11. FIGURE 3-7) to fuel filter (15) using two new seals (10) and swivel union plug (9).
c.
Connect supply line (11) hoses to fuel injection pumps (5) and secure with clamps (4).
d.
Connect fuel return line to supply line (11).
3-16.
FUEL FILTER.
3-16.1. Service.
Warning
Fuel Is flammable. Keep fuel away from heat and open name. Failure to observe this warning
could result In severe personal injury or death.
NOTE
Catch fuel in suitable container.
a.
Remove through bolt (1, FIGURE 3-12) and cannister (2).
b.
Remove and discard fuel filter (3) and gaskets
c.
Install new filter (3) and gaskets.
d.
Fill cannister (2) with clean fuel.
e.
Install cannister (2) with bolt (1).
f.
Prime fuel system, refer to paragraph 3-12.
FIGURE 3-12. Fuel Filter
3-29
|
|
