TM   9-2815-202-34 4-34.   CYLINDER This  task  covers: LINER   MAINTENANCE a.  Removal b.  Cleaning c. Inspection - d. Measurements e.  Honing f. Selection of New Cylinder Liner g. Fitting Cylinder h.  Installation Liner  in  Block  Bore INITIAL   SETUP MODELS EXPENDABLE/DURABLE   SUPPLIES         All Fuel oil (App C, Item 21) EQUIPMENT   CONDITION TOOLS  AND  SPECIAL  TOOLS Para   Description General mechanics tool kit (App B, Item 96) 4-20  Oil  pan  removed Depth gage (App B, Item 28) 4-27  Cylinder  head  removed Cylinder liner remover (App B, Item 76) 4-31 Oil pressure regulator and relief valve Cylinder hone (App B, Item 42) removed Cylinder bore gage (App B, Item 27) 4-32 Oil pump and oil pump tubes removed Micrometer 4-5 inch (App B, Item 65) 4-33 Piston and rod assembly removed Cylinder liner hold-down clamps (App B, kern 11) Torque wrench (App B, Item 101) a.   Removal CAUTION (1) (2) Do not insert bar in liner ports and rotate crankshaft to push out liner. Piston may be damaged or upper ring  groove  may  collapse. Loosen  cylinder  liner  (1)  using cylinder  liner  removing  tool  (2). Remove tool from liner. Then remove liner  from  cylinder  block. 4-144.1   Blank/4-144.2 C h a n g e    1