| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
GENERATOR (650 AMPERE) DRIVE GEAR TEST
THIS WORK PACKAGE COVERS:
Test
INITIAL SETUP:
Tools:
Mandatory Replacement Parts:
General mechanic's tool kit (item 121, WP 0176)
Gasket (2) (item 353, WP 0175)
Generator coupling tool (item 58, WP 0176)
Lock washer (5) (item 98, WP 0175)
Generator holding fixture (item 59, WP 0176)
Self-locking nut (item 35, WP 0175)
Torque wrench, 0-600 foot-pounds (item 128,
Personnel Requirements:
Track Vehicle Repairer (2) 63H10
Engine (flywheel) turning tool (for Models 2CA
Equipment Conditions:
and 2DA): splined wrench (item 136,
Generator removed (WP 0051)
Expendable and Durable Items:
Lubriplate (item 23, WP 0173)
GENERATOR DRIVE GEAR TEST
NOTE
The drive gear test is to be performed when generator output is
questionable and whenever the generator is replaced (WP 0051).
Refer to WP 0021 (Generator Abnormal Operation).
There are two methods of testing the drive gear: the first one is with
the gear installed on the engine, the other is a bench test. Use the
method that best suits your situation.
Generator drive gear assembly
WP 0039 00-1
|
||
|
||
