| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
FUEL SUPPLY PUMP MOUNTING ADAPTER REPAIR/REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools:
Expendable Materials (Continued):
General mechanic's tool kit (item 121, WP 0176)
Lubriplate (item 23, WP 0173)
Mechanical puller (2) (item 90, WP 176)
Sealing compound, silicone sealant (item 30,
Torque wrench, 0-600 ft-lb (item 128, WP 0176)
Personnel Required:
Mandatory Replacement Parts:
Track Vehicle Repairer (1) 63H10
Gasket (1) (item 349, WP0175) [
Equipment Conditions:
Self locking nuts(8) (item 140, WP 0175)
Engine removed from vehicle and placed on a
Expendable Materials:
flat stationary surface
Cleaning compound solvent (item 8, WP 0173)
Fuel back-flow valve removed (WP 0081)
Crocus cloth (item 9, WP 0173)
REMOVAL
1. Remove back-flow valve bracket (1).
a. Remove two self-locking nuts (2) with
flat washers (3). Discard self-locking
nuts (3).
b. Remove bracket (1).
2. Remove fuel supply pump mounting
adapter (4).
a. Remove six self-locking nuts (2) with flat
1
washers (3). Discard self-locking nuts.
b. Remove adapter using two mechanical
5
pullers (5) (item 90, WP 0176).
c. Remove and discard gasket (6).
2,3
4,6
CLEANING
5
1. See Work Package 0028 for Standard
Cleaning Procedures.
WP 0109 00-1
|
||
|
||
