| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Cleaning, Inspection, Assembly, and Installation
INITIAL SETUP:
Tools and Special Tools:
Mandatory Replacement Parts (Continued)
General mechanic's tool kit (item 121, WP 0176)
O-ring (item 69, WP 0175)
Inside micrometer caliper set (item 16, WP 0176)
O-ring (item 61, WP 0175)
Mechanical puller (item 89, WP 0176)
O-ring (item 5, WP 0175)
Outside micrometer caliper set
Self-locking nut (4) (item 139, WP 0175)
(item 17, WP 0176)
Expendable Materials:
Retaining ring pliers (item 79, WP 0176)
Lubriplate (item 23, WP 0173)
Telescoping gauge set (item 54, WP 0176)
Prussian blue paste (item 25, WP 0173)
Thickness gauge blade (item 55, WP 0176)
Personnel Requirements:
Thickness gauge blade (item 56, WP 0176)
Track Vehicle Repairer (1) 63H10
Thickness gauge blade (item 57, WP 0176)
Equipment Conditions:
Torque wrench, 0-175 foot-pounds
(item 127, WP 0176)
Rocker arm covers removed (WP 0104)
Fuel/water separator filter bracket removed for
Mandatory Replacement Parts:
left side camshaft replacement (WP 0164)
Air duct hose (item 181, WP 0175)
Shrouds removed (WP 0055)
Gasket ( item 361 WP 0175)
Inter-cylinder sleeve (5) (item 248, WP 0175)
Lock washer (3) (item 95, WP 0175)
Lock washer (2) (item 93, WP 0175)
CAUTION
Camshaft valve timing must be accomplished after completion of this
work package (Work Package 0035, Intake and Exhaust Valve
Timing).
REMOVAL
NOTE
Left and right bank camshafts, drive gears and associated parts are
replaced the same way. This work package replaces only one. The
differences will be noted in the work package.
Cylinders are equipped with replaceable camshaft bearings. The
bearing half in the cover should remain with the cover.
WP 0146 00-1
|
||
|
||
