Tweet |
Custom Search
|
|
|
||
TM 9-2815-226-34-2
Table 3-5. Timing
Bar in
Pulley
Cyl.
Set Cylinder
Direction
Position
Firing
Injector
Valve
Start
A
1
3
5
Advance to
B
5
6
3
Advance to
C
3
2
6
Advance to
A
6
4
2
Advance to
B
2
1
4
Advance to
C
4
5
1
NOTE
Note that in Timing Table 3-5, the same engine position (A, B, or C) mark on pulley
used to adjust injector is also used for setting intake and exhaust valves.
However, valves to be adjusted are not the same cylinders as injectors. In the
present position ("A" mark on pulley and no. 5 valves closed), since no. 3 injector
has been adjusted, no. 5 cylinder valves are ready for adjustment. Always adjust
valves after injector adjustment. Move progressively down the table until all
injectors and valves are adjusted.
(9)
Loosen valve rocker lever adjusting screw locknut and back-off adjusting screw.
3-455
|
||