SWITCH BOX STRAP ASSEMBLY MAINTENANCE.

Custom Search

Back
Figure 4-7. Switch Box Latch Replacement

Up
TM-9-6115-666-13-P AN/MJQ-1612 60kW 50/60 Hz Power Plant Diesel Engine Driven 5 Ton Trailer Mounted Manual

Next
INSTALLATION

ARMY TM 9-6115-666-13&P

AIR FORCE TO 35C2-3-505-1

4.13. SWITCH BOX STRAP ASSEMBLY MAINTENANCE.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

Equipment Conditions

Tool Kit, General Mechanic's (item 1, appendix B)

Reference

Drill, 1/4 inch (item 2, appendix B)

Both generator sets shut down, paragraph 2.7.1

Blind Fastener Installation Kit (item 8, appendix B)

Trailer support devices are lowered.

Switch box cover removed, paragraph 4.11

Clear plastic panel covers removed,

REMOVAL

1. Release strap securing top cover on switch box and remove switch box cover.

2. Remove two nuts (1, figure 4-8), flat washers (2), lock washers (3), and screws (4) that secure strap

(5), and loop (6) assembly to switch box.

3. Remove strap (5) and loop (6) assembly.

4. Drill out rivets (7) securing loop (8) to cover.

Figure 4-8. Switch Box Strap Assembly Replacement

4-19