| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-220-24
DAMPER/OIL FILTER HOUSING ASSEMBLY REPLACE/REPAIR
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Cleaning, Inspection, Repair, Assembly, and Installation
INITIAL SETUP:
Tools and Special Tools:
Equipment Conditions:
Four leg sling (item 105, WP 0176)
Wiring harness removed (for 2CA use
General mechanic's tool kit (item 121, WP 0176)
use WP 0059)
Torque wrench, 0-300 inch-pounds
Engine on maintenance stand (WP 0130)
(item 124, WP 0176)
Fans, covers, and top deck removed (WP 0054
Torque wrench, 500-2500 inch-pounds
and WP0055)
(item 128, WP 0176)
Throttle control solenoid assembly and
Mandatory Replacement Parts:
Gasket (item 105, WP 0175)
and WP 0123)
Gasket (item 331, WP 0175)
Fuel/water separator bracket assembly removed
O-ring (item 142, WP 0175)
Heater fuel filter mounting bracket removed
O-ring (2)(item 145, WP 0175)
O-ring (3)(item 148, WP 0175)
2CA, 2DA: Pump drive adapter assembly
Pipe plug (1) (item 255, WP 0175)
removed
Pipe plug (1) (item 276,WP 0175)
Pipe plug (2) (item 278, WP 0175)
Manifold heater pump, fuel back flow valve,
brackets and lines removed (WP 0081)
Pipe plug (4) (item 56, WP 0175)
Manifold heater solenoids and lines removed
Pipe plug (5) (item 170, WP 0175)
Self-locking nuts (2) (item 33, WP 0175)
Fuel/water separator drain cock and lines
Self-locking nuts (16) (item 34, WP 0175)
removed (WP 0084)
Expendable Materials:
2CA, 2DA: Engine installation guides removed
Lubriplate (item 23, WP 0173)
2DR: Power take-off housing and associated
Sealing compound, silicone sealant
parts removed (WP 0111)
(item 33, WP 0173)
Engine and transmission oil coolers and lines
Personnel Required:
removed (WP 0072)
Track Vehicle Repairer (2) 63H10
Oil cooler frames and shrouds removed
Breather tube removed (WP 0078)
Oil lines to turbo and fuel injection pump
removed (WP 0078)
WP 0151 00-1
|
||
|
||
